Tel : (0044) (0)1384 868080    Fax : (0044) (0)1384 482088    Email : sales@ppnonferrous.co.uk
Stock Ranges,sizes & tolerances
Click on the links for our product sites below
Other Products From P&P Non Ferrous
Unit 2,Albion works,Moor Street
Brierley Hill, West Midlands
DY5 3SZ
TEL:01384 868080
FAX:01384 482088
The information above is based on our current knowledge and is given in good faith; however the company will accept no liability in respect of any third party reliance thereon.
Diameter Tolerance
8mm – 18mm +/- 0.22mm
18mm – 25mm +/- 0.25mm
25mm – 40mm +/- 0.30mm
40mm – 50mm +/- 0.35mm
50mm – 65mm +/- 0.40mm
65mm – 80mm +/- 0.45mm
80mm – 100mm +/- 0.55mm
100mm – 120mm +/- 0.65mm
120mm – 150mm +/- 0.80mm
150mm – 180mm +/- 1.00mm
180mm – 220mm +/- 1.15mm
220mm – 270mm +/- 1.30mm
270mm – 320mm +/- 1.60mm
Tolerances
2014 is a copper based, high strength aluminium. Machinability of the material is good in the annealed state but somewhat more difficult in heat treated conditions. The alloy is easily cold worked in the T3 and T4 tempers.

Aluminium 2014 is has the following uses…

·Contribution to the manufacture of aircraft structures
·Truck frame
Aluminium 2014 Tolerances