Tel : (0044) (0)1384 868080    Fax : (0044) (0)1384 482088    Email : sales@ppnonferrous.co.uk
Stock Ranges,sizes & tolerances
Click on the links for our product sites below
Other Products From P&P Non Ferrous
Unit 2,Albion works,Moor Street
Brierley Hill, West Midlands
DY5 3SZ
TEL:01384 868080
FAX:01384 482088
The information above is based on our current knowledge and is given in good faith; however the company will accept no liability in respect of any third party reliance thereon.
Typical Chemical Composition
Elements Min % Max %
Al Remainder  
Cr   0.1
Cu 3.9 5
Fe   0.5
Mg 0.2 0.8
Mn 0.4 1.2
Ni   0.1
Others each   0.05
Others total   0.15
Si 0.5 0.9
Ti   0.15
Zn   0.25
Zr+Ti   0.2
Typical Mechanical Properties
Property/unit Condition Temp Size Min Max
Tensile Strength (N/mm2) H13 RT <= 18mm 210 300
0.2% Proof Stress (N/mm2) H13 RT <= 18mm 190  
Elongation in 100mm % H13 RT <= 18mm 5  
Tensile Strength (N/mm2) T4 RT <= 18mm 380  
0.2% Proof Stress (N/mm2) T4 RT <= 18mm 255  
Elongation in 100mm % T4 RT <= 18mm 18  
Tensile Strength (N/mm2) T6 RT <= 18mm 440  
0.2% Proof Stress (N/mm2) T6 RT <= 18mm 415  
Elongation in 100mm % T6 RT <= 18mm 9  
Tensile Strength (N/mm2) T62 RT <= 18mm 440  
0.2% Proof Stress (N/mm2) T62 RT <= 18mm 415  
Elongation in 100mm % T62 RT <= 18mm 9  
Chemical & Physical Properties